Built to standards that matter
Trust Aquafarer
Every product we build is CE certified — tested for safety,
durability, and performance. No shortcuts. No exceptions.
Aquafarer by the numbers
Certifications & Compliance
Every product is independently tested and certified to international standards.
CE Certification
All Aquafarer SUPs, kayaks, dinghies, and RIBs meet the European CE safety standard for recreational watercraft. Each product undergoes pressure, buoyancy, and load testing before leaving the factory.
Our 12,000 m² Qingdao facility operates under an ISO 9001 quality management system. Every production batch is traceable, documented, and inspected.
BSCI Social Compliance
We are BSCI-certified, ensuring ethical labor practices, safe working conditions, and environmental responsibility across our supply chain.
REACH & RoHS
All materials — PVC, Hypalon, EVA foam, adhesives — comply with EU REACH and RoHS regulations. No restricted substances, no compromises.
Material Testing Lab
In-house materials lab tests tensile strength, UV resistance, seam integrity, and abrasion for every fabric batch before production.
5-Year Boat Warranty
Aquafarer boats are covered by a 5-year limited warranty on tube fabric, seams, and hull. SUP boards and accessories carry a 2-year warranty. We stand behind what we build.
In-House Testing & Quality Lab
Every material batch and finished product goes through our on-site testing laboratory before it ships.
Tensile Strength Testing
Every PVC fabric roll is tested per ASTM D751 standards. Minimum requirement: 350 N/cm warp and weft. Rejected batches are returned to supplier — we reject approximately 3% of incoming materials.
UV Accelerated Aging
Fabric samples undergo 1,000-hour QUV accelerated weathering (ASTM G154). Retention of tensile strength must exceed 80% after UV exposure. Products rated for 3+ years of outdoor use.
Seam Peel Strength
RF welded seams tested at 5 N/mm minimum peel strength (ASTM D751). Hand-glued Hypalon seams tested at 3.5 N/mm. Each production batch has seam samples destructively tested and archived.
24–48 Hour Pressure Hold
Every inflatable product inflated to 1.25x rated PSI and monitored for 24–48 hours. Maximum allowable pressure drop: 5%. Products failing this test are reworked and retested before shipment.
Valve Cycle Testing
Every valve design undergoes 10,000 open-close cycles in our lab. Valves must maintain airtight seal at 1.25x rated pressure after cycling. All Aquafarer valves rated for 5+ years of regular use.
Cold Crack Resistance
Materials tested at -30°C for 4 hours per ISO 4646. No cracking or embrittlement allowed. Products rated for winter storage and cold-water use down to -10°C ambient temperature.
Customer Trust
What our customers say
From first-time paddlers to professional fleet operators — see why they trust Aquafarer.
Operations Director, Adriatic Adventure Tours — Dubrovnik, Croatia
Marco Valenti
SUP Explorer 11 owner — Vancouver, Canada
James Thornton
Maritime Procurement Officer, Philippine Coast Guard Auxiliary — Manila, Philippines
Lt. Commander Andres Reyes
How we ensure quality
From raw material inspection to final pressure testing — every product goes through a rigorous quality chain.
-
Raw Material Inspection
Every roll of PVC fabric is tested for thickness, tensile strength, and UV resistance before entering production.
-
In-Process QC
Weld seams, valve installations, and chamber bonds are inspected at each station during assembly.
-
Pressure Testing
Every inflatable product is inflated to 1.25x rated PSI and held for 24–48 hours to verify air retention and seam integrity.
-
Final Inspection
Each unit is inspected for finish, hardware, and packaging before being approved for shipment. Batch samples go to our lab for destructive testing.
Want to see the certifications yourself?
Request our certification portfolio, factory audit reports, or material compliance documentation. No NDA required.